Tuesday, August 01, 2017

Cumaru Front Porch

Our front porch was in bad shape, so with the help of a friend, we replaced it with Cumaru hardwood decking.  

Friday, February 24, 2017

Maple Nightstands and Bed

We needed new furniture for our guest bedroom, and I really wanted to work with maple to highlight its color and brightness.  I used a natural water based finish from General Finishes on the maple, and I'm really pleased with the result.  

The legs for the nightstands are metal tipped and from TableLegs and the drawer pulls from Schoolhouse Electric.

Friday, July 22, 2016

Radiator Covers

A friend of mine asked me to build him some radiator covers that matched some of his existing furniture in the basement.  The left one was in a tight space due to a storage unit, but fortunately the other one had more room.  


The walnut and brass mesh combo turned out well, and the left cover fit perfectly.  The doors
are soft close, of course, and reflective insulation will be installed to direct the heat forward.  Below are the radiators.

Wednesday, September 02, 2015

Great Auk Kayak

I'm in the process of building my first cedar strip kayak, which I bought from Chesapeake Light Craft.  It's a fun process, but requires a lot of patience.  I was hoping to finish it this season, but likely not.  I'll probably make the paddle this winter, and if I'm ambitious, a kayak for my wife.

This is the hopefully how it will look when I'm done.

Unpacking and setting up the forms.

Glueing up some long strips.  Adding the sheer strips.  Adding the first strips.

Just before adding the cheater strips to fill in the gaps at the bow and stern.

Cheater strips all filled and starting to strip the bottom.

Cutting and planing the keel line so the other half could be added and match symmetrically.

Sunday, July 26, 2015

Walnut TV Stand - continuous grain sides, top, and fronts.

We were using our our old coffee table as our TV stand, so I built a new one to match the style of the round end table.  The 2 middle drawers and 2 outer doors are push to open, so it doesn't have any pulls to disrupt the grain.  It was designed for the space and the components. 

No end grain is visible on the sides so it shows a continuous grain from side to top to side. (That's my future kayak, in the works, in the background.)

Here are a few pictures of the unfinished version. This is also the first piece with my new logo, which my wife created.  I need to practice with the brand.  Getting a uniform brand can be tricky. 

Friday, May 15, 2015

Walnut Side Table

We needed a small side table between our 2 chairs, so I took a design we saw at Room and Board and modified it a bit.  It was a challenging piece with the angles, curves and routing the curves, but it turned out great.  Google Sketchup really helped with figuring out the angles and being able to print a template for the bottom shelf.

Monday, January 26, 2015

Mom's New Kitchen

Mom bought a new house last summer, and the kitchen was seriously outdated.  
So for Christmas, I along with a friend tore out the old cabinets and installed all new cherry cabinets and stainless steel appliances. She also had a quartz countertop installed.

All that remains is to finish painting, install the door panels on the upper cabinets and peninsula, install some under cabinet lighting under the corner cabinet, and a nice tile backsplash in the corner between the frig and stove.  
Here are the before pictures.